ROBUSKIT 600 BD

ROBUS

SWING GATES ROBUS

ROBUS SLIDING GATES

User-friendly: thanks to the BlueBUS system, allowing the control unit to be connected to up to 7 pairs of photocells and control, security and signalling devices with just two wires. Practical: control unit and optional PS124 buffer batteries can be connected by means of practical guided - connector. Advanced: RB400, RB600 and RB1000 are equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cutout. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other. Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels. Safe: acceleration and deceleration can be adjusted at the beginning and at the end of each opening and closing manoeuvre. Sturdy: base and release in pressure die cast with easy to open handle. Silent: gear motor on bearings.

ROBUS 400 600 1000

NICE - For sliding gates weighing up to 400 kg (RB400), up to 600 kg (RB600) and up to 1000 kg (RB1000).

Versions with electromechanical limit switch (RB400/RB600/RB1000) and with inductive limit switch (RB600P/RB1000P).

Manuals - Datasheets

ROBUS 400 600 1000

ROBUSKIT 400 BD

NICE - For sliding gates weighing up to 400kg.

Kit contains: 1x RB400 - 1 Irreversible electromechanical gearmotor, with built-in control unit and OXIBD bidirectional radio receiver with connector for connection via Nice BlueBUS. 2x ON3EBD - 2 Transmitters 433.92 MHz, 3 channels, bidirectional. 1X EPMB - 1 Couple of external photocells designed for connection by Nice BlueBUS. 1X ELAC - 1 LED flashing light with integrated aerial. 1X TS - 1 Signboard. User-friendly: thanks to the BlueBUS system, allowing the control unit to be connected to up to 7 pairs of photocells and control, security and signalling devices with just two wires. Practical: control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside Robus. Advanced: RB400 is equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other. Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels. Safe: acceleration and deceleration can be adjusted at the beginning and at the end of each opening and closing manoeuvre. Sturdy: base and release in pressure die cast with easy to open handle. Silent: gear motor on bearings.

Manuals - Datasheets

ROBUS 400 BD

Nice - For sliding gates weighing up to 600kg.

Kit contains: 1x RB600 - 1 Irreversible electromechanical gearmotor, with built-in control unit and OXIBD bidirectional radio receiver with connector for connection via Nice BlueBUS. 2x ON3EBD - 2 Transmitters 433.92 MHz, 3 channels, bidirectional. 1X EPMB - 1 Couple of external photocells designed for connection by Nice BlueBUS. 1X ELAC - 1 LED flashing light with integrated aerial. 1X TS - 1 Signboard. User-friendly: thanks to the BlueBUS system, allowing the control unit to be connected to up to 7 pairs of photocells and control, security and signalling devices with just two wires. Practical: control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside Robus. Advanced: RB600 is equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other. Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels. Safe: acceleration and deceleration can be adjusted at the beginning and at the end of each opening and closing manoeuvre. Sturdy: base and release in pressure die cast with easy to open handle. Silent: gear motor on bearings.

Manuals - Datasheets

ROBUS 600 BD

ROBUS HIGH SPEED

User-friendly: thanks to the Nice BlueBUS technology, the control unit can be connected to up to 7 couples of photocells, control, security and signalling devices, using two wires only. Practical: control unit and buffer batteries PS124 (optional) connected by practical guided plug-in connector, housed in the gearmotor. Advanced: the temperature sensor adapts the motor power to the climatic conditions and at the same time thermal cut-out; a master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other. Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels. Safe: acceleration and deceleration can be adjusted at the beginning and at the end of each opening and closing manoeuvre. Sturdy: base and release in pressure die-cast with easy to open handle. Silent: gear motor on bearings. Considering standard installation, excluding acceleration and deceleration.