High Speed

HYKE

HYKE HS

Nice - For hi-speed automation of swing gates with leaves up to 3m or 270Kg.

Ultra-powerful and reliable: thanks to the torque of 500 Nm and encoder technology, for millimetric precision and reliability.

Safe movement: dual technology obstacle detection.

Sturdy: thanks to the housing in aluminium with polyester paint finish, resistant to atmospheric agents.

Two irreversible 24 Vdc versions with limit switches on opening and closing: with a built-in control unit (HK7024) and without a control unit (HK7224).

Practical and quick installation: the articulated arm is adjustable in length for maximum flexibility.

Simple and precise limit switch adjustment: mechanical stops and micrometric adjustment screws.

No black out: with the optional batteries (PS124) housed inside the gear motor.

A built-in control unit (HK7024):

•Simple programming, by means of a single key;

•Automatic memorization of limit switches on opening and closing with a self-learning function;

•Automatic fault diagnostics;

•Programming of pause time;

•Pedestrian pass door;

•Deceleration on opening and closing;

•Obstacle detection with dual technology;

•Provision for connection of latest generation resistive

•Sensitive edges.

Considering standard installation, excluding acceleration and deceleration.

Ideal for residential applications even with large columns. 24 Vdc electromechanical gear motor with an articulated arm, surface mounted, with magnetic encoder.

Ideal for intensive use and quick manoeuvres: 90° opening in about 10* seconds.

HYKE HS DATASHEET

L-FAB HS

NICE - For hi-speed automation of swing gates with leaves up to 4 m or 400Kg.

Foundation boxes with mechanical stop on opening:

In stainless steel (LFABBOX4I), ideal for use in eWtreme conditions;

wiWK WKe FaWapKoreViV painW finiVK (LFABBOX4), highly resistant to corrosion.

Total freedom of choice: release from inside or outside, lever operated models, freely combinable and easy to operate with just one hand.

Simple installation: mechanical stop system on closure. Standard opening maW. 11¦, optional opening 360°.

Ideal for intensive use, LFAB4024HS model is compatible with the control unit Moonclever MC824H, with BlueBUS technology, Solemyo and Opera systems:

simple programming, by means of a single key;
automatic memorization of limit switches on opening and closing with self-learning function;
automatic fault diagnostics;
programming of pause time;
pedestrian pass door;
deceleration on opening and closing;
obstacle detection with dual technology;
operation in event of power failure by means of optional rechargeable batteries (PS24);
provision for connection of latest generation resistive sensitive edges.
onsidering standard installation, eWcluding acceleration and deceleration.

Underground installation.
24 Vdc electromechanical gearmotor with magnetic encoder and mechanical stops.

Ideal for intensive use and quick manoeuvres: 90° opening in about 6* seconds.

L-FAB HS Datasheet

ROBUS HS

User-friendly: thanks to the Nice BlueBUS technology, the control unit can be connected to up to 7 couples of photocells, control, security and signalling devices, using two wires only.

Practical: control unit and buffer batteries PS124 (optional) connected by practical guided plug-in connector, housed in the gearmotor.

Advanced: the temperature sensor adapts the motor power to the climatic conditions and at the same time thermal cut-out; a master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.

A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.

Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.

Safe: acceleration and deceleration can be adjusted at the beginning and at the end of each opening and closing manoeuvre.

Sturdy: base and release in pressure die-cast with easy

to open handle.

Silent: gear motor on bearings.

Considering standard installation, excluding acceleration and deceleration.

ROBUS HS

Nice - For hi-speed automation of sliding gates weighing up to 250 Kg (RB250HS) and up to 500 kg (RB500HS).

Ideal for residential and industrial applications.
24 Vdc, electromechanical gear motor.

Ideal for intensive use: opening a 4 m gate takes around 10* seconds with RB250HS and around 9* seconds with RB500HS.

ROBUS HS DATASHEET

RUN HS

User-friendly: thanks to the Nice BlueBUS technology, the control unit can be connected to up to 7 couples of photocells, control, security and signalling devices, using two wires only.

Practical: control unit and buffer batteries PS124 (optional) connected by practical guided plug-in connector, housed in the gearmotor.

A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.

Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.

Safe: acceleration and deceleration can be adjusted at the beginning and at the end of each opening and closing manoeuvre.

Sturdy: base and release in pressure die-cast with easy

to open handle.

Silent: gear motor on bearings.

Considering standard installation, excluding acceleration and deceleration.

RUN HS

For hi-speed automation of sliding gates weighing up to 400 Kg (RUN400HS) and up to 500 kg (RUN1200HS).

Rapid manoeuvres, with opening and closing: Opening a 4m gate takes around 6* seconds with RUN400HS, while opening a 7m gate takes around 18* seconds with RUN1200HS.